Wide Chamber Feed Hammer Mill

Wide Chamber Feed Hammer Mill Introduction

To meet the fine grinding requirement of the aquatic feed pellet production, our company developed the new generation aquatic feed hammer mill. Now the aquatic feed hammer mill has been adopted by feed pellet manufacturers from different regions. It is proved to be a good choice for aquatic and poultry feed production.

Aquatic Feed Hammer Mill Application

The aquatic feed hammer mill is widely adopted in large and medium scale aquatic or poultry feed pellet manufacturing industries. It’s a pretreatment equipment to cut down the size of the feed raw materials with a water content of 8%-13% for further processing. As a fine grinding machine, its grinding fineness can reach 50 mesh. The common raw materials for the aquatic feed hammer mill are grains such as wheat, maize, rice, soybean, groundnut, millet or other solid materials such as bone, dry meat and so on.

Remarkable Features of the Aquatic Feed Hammer Mill

1. Universal type product, stable performance, widely used for grinding of raw materials in large and medium-sized animal and aquatic feed processing factories.
2. Not only ordinary grinding but also fine grinding are available, mostly used for fine grinding.
3. Fineness of the finished products can reach over 50 mesh.
4. Adopt coupling direct drive, scientific and reasonable hammer arrangement and hammer screen clearance ensure uniform fineness of the finished products.
5. Advanced twice strike technology of the pulverizing chamber, good rigidity pedestal and small vibration.
6. Equipped with imported high quality SKF bearings, good performance, low working temperature.
7. A variety of sieve sizes are available to choose, flexible opening device and elastic pressure sieve mechanism, convenient to operate and maintain.
8. Siemens motor

Aquatic Feed Hammer Mill Working Principle

The Aquatic feed hammer mill uses the direct bearing driving. The feed raw material flows into the grinding chamber through the up feeder and is soon crushed by the high-speed rotating hammer plates installed around the center bearing. Then the material is blew by the airflow to the gap between the hammer plates and the sieve tooth plates and crushed for the twice time. With times of collision and friction, the feed raw material will meet the requirements of fineness and is blew out the holes on the sieve tooth plates and comes out from the discharge hole.
With an unique design of the removable sieve tooth plates, the aquatic feed hammer mill is available for different fineness requirements of the feed material.

Aquatic Feed Hammer Mill Operation Directions

1. Overload is strictly forbidden.
2. Avoid hard sundries material feeding into the crushing chamber to damage the hammer plates.
3. After the machine work 1000 hours, the bearing need a unpick and wash, adding the grease at the same time. Prevent dust from entering the bearing.
4. Correctly install the hammers and to weigh them regularly. Change the hammers with a weight less than the stated weight.
Correctly install the sieves, the rough side should toward inside to install.
6. Keep clear of the air outlet.

Technical Parameter of the Aquatic Hammer Mill